Product Details
Different functions of different types:
1. Tip holding function: stopper designed for the prevention of fracture of the holding part and occurrence of foreign matter such as bloodstain during surgery
2. Removing broken screws, this tool should be used together with the guide for each system. When the marked part of the reverse drill is exposed above the guide, connected to the fixture, make use of the screw-holder to remove the broken Screws
3. The connector used for connecting the driver for square torque to the round torque wrench.
|
Width W1
|
1.16
|
1.16
|
1.25
|
1.28
|
Overall length L
|
16
|
22
|
21
|
21
|
Dental implant success is related to operator skill, pleasant and volume of the bone handy at the site, and the patient's oral hygiene, but the most vital aspect is predominant implant stability. While there is well sized variation in the charge that implants fail to integrate (due to person chance factors), the approximate values are 1 to 6 percent
|
Width W1
|
1.23
|
1.23
|
2.41
|
2.41
|
DiameterΦD
|
1.32
|
1.32
|
2.72
|
2.72
|
length of cut L1
|
11.5
|
16.5
|
9.0
|
15.0
|
Overall length L
|
20.0
|
25.0
|
17.5
|
23.5
|
Caution:Fracture occurs, in case excessive torque is applied.
-
When applying torque, check that the screw hex is completely installed. Application of torque with imperfect installation may result in a fracture at
the strength under fracture strength.
-
Torque should be applied vertically. (Do not tilt the set.)
-
If the tip is bent due to the use for a long time or excessive torque, replace it.
Immediate post-operative risks
1. Infection (pre-op antibiotics limit the chance of implant failure by way of 33 percent but do no longer affect the danger of infection).
2. Excessive bleeding
3. Flap breakdown (less-than 5 percent)